Cisco TelePresence

Interoperability Database

Warning - In preview mode

We endeavor to make our Cisco TelePresence products interoperable with all relevant standards-based equipment. Although it is not possible to test all scenarios, the testing on which this data is based covers most common functions of the listed endpoints and infrastructure.

The following pages describe the software releases that were tested for interoperability with Cisco TelePresence products. The results are grouped by product range. It is not possible to guarantee that all the models listed in the Product(s) column have been tested with the specified software release, although to the best of our knowledge we believe that all such models are interoperable with the associated software release. The absence of a device or release does not imply a lack of interoperability.

Cisco TelePresence System TX1300 47 software version TX6.0.3

Show data for version: TX6.0.3TX6.0.2TX6.0.06.1.1-50D-K9 P21.9.x1.9.2


To see all interoperability information for all 6.0.x releases, click all tabs associated with that release (for example, 6.0.0 and 6.0.2, if visible). 


Cisco TelePresence

Product(s) Software releaseComments
Cisco TelePresence Multipoint Switch (CTMS) 1.9

When in a multipoint call using CTMS between EX systems running TC5 or TC6 and TX9000 or TX9200 systems, the presentation rate is limited to 5 frames per second (fps).

Cisco TelePresence Multipoint Switch (CTMS) 1.8

When in a multipoint call using CTMS between EX systems running TC5 or TC6 and TX9000 or TX9200 systems, the presentation rate is limited to 5 frames per second (fps).

Cisco TelePresence Server 3.1

Tested TIP:

  • No issues found

Tested CUCM to VCS H.323 interworking:

  • Interworking calls from this endpoint is not recommended

We recommend that you your TX systems be running a minimum TX version of 6.0.3 with TelePresence Server software 3.1.