|
We endeavor to make our Cisco TelePresence products interoperable with all
relevant standards-based equipment. Although it is not possible to test all
scenarios, the testing on which this data is based covers most common functions
of the listed endpoints and infrastructure.
The following pages describe the software releases that were tested for
interoperability with Cisco TelePresence products. The results are grouped by
product range. It is not possible to guarantee that all the models listed in the
Product(s) column have been tested with the specified software release, although
to the best of our knowledge we believe that all such models are interoperable
with the associated software release. The absence of a device or release does
not imply a lack of interoperability.
Cisco TelePresence
Product(s) |
Software release | Comments |
---|
Cisco TelePresence System 500-37, 1000, 1100, 1300-65, 3000, 3010, 3200, and 3210 |
1.10 |
No issues if the systems are registered to a Cisco Unified Communications Server running 9.1(1) or 8.6(2a)SU3.
Video: Up to 1080p Audio: AAC-LD Security: Secure Presentation: Yes (Auto-Collaborate)
|
Cisco TelePresence System TX 1300 47, Cisco TelePresence System 500-32, Cisco TelePresence System TX1300 47, Cisco TelePresence System TX1310 65, Cisco TelePresence System TX9000, Cisco TelePresence System TX9200 |
TX6.0.0 |
No issues if the systems are registered to a Cisco Unified Communications Server running 9.1(1) or 8.6(2a)SU2.
Video: Up to 1080p Audio: AAC-LD Security: Secure Presentation: Yes (Auto-Collaborate) |
Cisco
Product(s) |
Software release | Comments |
---|
Cisco Unified Communications Manager |
8.6(2a)SU2 |
Supported with the following deployments:
- CTS-Manager 1.8.1 and CTMS 1.8.3
- CTS-Manager 1.9.0 and CTMS 1.9.0
- VCS X7.2
- MCU 4.3(1.68)
- TelePresence Server (TS) 2.3(1.55)
- WebEx SP31
Note: WebEx only works with CTMS.
Tested with the following deployments without VCS:
- CTS-Manager 1.7.5 and CTMS 1.7.3
Notes:
CTS-Manager 1.7.x treats TC endpoints as videoconferencing devices (no One-Button-To-Push functionality).
The CTS TX9000, TX9200, and CTS TX1310 65 systems require a minimum of CTS-Manager 1.7.5.
|
Cisco Unified Communications Manager |
9.1(1) |
Supported with the following deployments:
- CTS-Manager 1.8.1 and CTMS 1.8.3
- CTS-Manager 1.9.0 and CTMS 1.9.0
- VCS X7.2
- MCU 4.3(1.68)
- TelePresence Server (TS) 2.3(1.55)
- WebEx SP31
Note: WebEx only works with CTMS.
Tested with the following deployments without VCS:
- CTS-Manager 1.7.5 and CTMS 1.7.3
Notes:
CTS-Manager 1.7.x treats TC endpoints as videoconferencing devices (no One-Button-To-Push functionality).
The CTS TX9000, TX9200, and CTS TX1310 65 systems require a minimum of CTS-Manager 1.7.5. |
Cisco Unified Communications Manager |
8.5.1 |
This Unified CM version treats TC endpoints as third-party SIP endpoints.
This Unified CM version does not support BFCP. |
|