Cisco TelePresence

Interoperability Database

Warning - In preview mode

We endeavor to make our Cisco TelePresence products interoperable with all relevant standards-based equipment. Although it is not possible to test all scenarios, the testing on which this data is based covers most common functions of the listed endpoints and infrastructure.

The following pages describe the software releases that were tested for interoperability with Cisco TelePresence products. The results are grouped by product range. It is not possible to guarantee that all the models listed in the Product(s) column have been tested with the specified software release, although to the best of our knowledge we believe that all such models are interoperable with the associated software release. The absence of a device or release does not imply a lack of interoperability.

Cisco TelePresence System TX9000 software version 1.9.x

Show data for version: TX6.1.10(7)TX 6.1.4TX6.1.1TX6.1.0(91)TX6.0.3TX6.0.3TX6.0.2TX6.0.06.1.x6.1.12(4)1.9.x1.9.3(44)1.9.21.9.1

Cisco TelePresence

Product(s) Software releaseComments
Cisco TelePresence System 500-37, 1000, 1100, 1300-65, 3000, 3010, 3200, and 3210 1.10

No issues if the systems are registered to a Cisco Unified Communications Server running 9.1(1) or 8.6(2a)SU3.

Video: Up to 1080p
Audio: AAC-LD
Security: Secure
Presentation: Yes (Auto-Collaborate)

Cisco TelePresence System TX 1300 47, Cisco TelePresence System 500-32, Cisco TelePresence System TX1300 47, Cisco TelePresence System TX1310 65, Cisco TelePresence System TX9000, Cisco TelePresence System TX9200 TX6.0.0

No issues if the systems are registered to a Cisco Unified Communications Server running 9.1(1) or 8.6(2a)SU2.

Video: Up to 1080p
Audio: AAC-LD
Security: Secure
Presentation: Yes (Auto-Collaborate)

Cisco

Product(s) Software releaseComments
Cisco Unified Communications Manager 8.6(2a)SU2

Supported with the following deployments:

  • CTS-Manager 1.8.1 and CTMS 1.8.3
  • CTS-Manager 1.9.0 and CTMS 1.9.0
  • VCS X7.2
  • MCU 4.3(1.68)
  • TelePresence Server (TS) 2.3(1.55)
  • WebEx SP31

Note: WebEx only works with CTMS.

Tested with the following deployments without VCS:

  • CTS-Manager 1.7.5 and CTMS 1.7.3

Notes:

CTS-Manager 1.7.x treats TC endpoints as videoconferencing devices (no One-Button-To-Push functionality).

The CTS TX9000, TX9200, and CTS TX1310 65 systems require a minimum of CTS-Manager 1.7.5.

 

Cisco Unified Communications Manager 9.1(1)

Supported with the following deployments:

  • CTS-Manager 1.8.1 and CTMS 1.8.3
  • CTS-Manager 1.9.0 and CTMS 1.9.0
  • VCS X7.2
  • MCU 4.3(1.68)
  • TelePresence Server (TS) 2.3(1.55)
  • WebEx SP31

Note: WebEx only works with CTMS.

Tested with the following deployments without VCS:

  • CTS-Manager 1.7.5 and CTMS 1.7.3

Notes:

CTS-Manager 1.7.x treats TC endpoints as videoconferencing devices (no One-Button-To-Push functionality).

The CTS TX9000, TX9200, and CTS TX1310 65 systems require a minimum of CTS-Manager 1.7.5.

Cisco Unified Communications Manager 8.5.1

This Unified CM version treats TC endpoints as third-party SIP endpoints.

This Unified CM version does not support BFCP.