Cisco TelePresence

Interoperability Database

Warning - In preview mode

We endeavor to make our Cisco TelePresence products interoperable with all relevant standards-based equipment. Although it is not possible to test all scenarios, the testing on which this data is based covers most common functions of the listed endpoints and infrastructure.

The following pages describe the software releases that were tested for interoperability with Cisco TelePresence products. The results are grouped by product range. It is not possible to guarantee that all the models listed in the Product(s) column have been tested with the specified software release, although to the best of our knowledge we believe that all such models are interoperable with the associated software release. The absence of a device or release does not imply a lack of interoperability.

Cisco TelePresence IX5000 and IX5200 software version 8.1.2

Show data for version: 8.1.28.1.0(201)8.0.3.1(1)8.0

Cisco TelePresence

Product(s) Software releaseComments
Cisco Expressway X8.9

We do not support registration of IX5000 and IX5200 endpoints to Expressway.

Cisco Expressway X8.8

We do not support registration of IX5000 and IX5200 endpoints to Expressway.

Cisco TelePresence Server 4.4

Tested CUCM (SIP).

  • An endpoint issue may result in a large number of RTCP authentication error messages in the TelePresence Server logs (CSCuz37894).
Cisco TelePresence Video Communication Server (VCS) X8.9

We do not support registration of IX5000 and IX5200 endpoints to VCS.

Cisco TelePresence Video Communication Server (VCS) X8.8
  • We do not support registration of TX9000 Series endpoints to the VCS.
  • In some call flows invoking the VCS B2BUA for encryption, calls may drop after some time if presentation is shared. This is most likely to affect immersive or multistream calls. This issue is resolved in X8.8.1, see CSCvc47502.