|
We endeavor to make our Cisco TelePresence products interoperable with all
relevant standards-based equipment. Although it is not possible to test all
scenarios, the testing on which this data is based covers most common functions
of the listed endpoints and infrastructure.
The following pages describe the software releases that were tested for
interoperability with Cisco TelePresence products. The results are grouped by
product range. It is not possible to guarantee that all the models listed in the
Product(s) column have been tested with the specified software release, although
to the best of our knowledge we believe that all such models are interoperable
with the associated software release. The absence of a device or release does
not imply a lack of interoperability.
Cisco TelePresence
Product(s) |
Software release | Comments |
---|
Cisco TelePresence System 500-37, 1000, 1100, 1300-65, 3000, 3010, 3200, and 3210 |
1.10 |
Tested to work with the Cisco MCU 4500 series registered to VCS version X7.2, X7.1, or X7.0, if the system running TX software is registered to Cisco Unified Communications Manager Version 9.1(1) or 8.6(2a)SU3.
For more information about products that are compatible with systems running CTS 1.10 software, refer to the Cisco TelePresence System Software Version Compatibility - 1.10 Releases document at the following URL: http://www.cisco.com/en/US/docs/telepresence/cts_admin/1_10/compatibility/cts_compatibility_1_10.html |
Cisco TelePresence System Quick Set C20, Cisco TelePresence Codec C40, Cisco TelePresence Codec C60, Cisco TelePresence Codec C90, Cisco TelePresence System EX60, Cisco TelePresence System EX90, Cisco TelePresence System Integrator C Series , Cisco TelePresence System EX Series |
TC4.0.0 |
No issues found |
Cisco TelePresence System TX 1300 47, Cisco TelePresence System 500-32, Cisco TelePresence System TX1300 47, Cisco TelePresence System TX1310 65, Cisco TelePresence System TX9000, Cisco TelePresence System TX9200 |
TX6.0.0 |
Tested to work with the Cisco MCU 4500 series registered to VCS version X7.2, X7.1, or X7.0, if the system running TX software is registered to Cisco Unified Communications Manager Version 9.1(1) or 8.6(2a)SU3.
For more interoperability information about products running TX6.0 software, refer to the Cisco TelePresence TX System Software Version Compatibility and Interoperability with Other Devices—6.0.x Releases at the following URL: http://www.cisco.com/en/US/docs/telepresence/tx_sw/6_0/compatibility/tx_sw_compatibility_6_0.html
|
Edge Series, Cisco TelePresence System 1000 MXP, Tandberg 1500 MXP, Cisco TelePresence System 1700 MXP, MXP 2000, MXP 3000, MXP 6000, MXP 7000, MXP 770, MXP 8000, MXP 880, MXP 990, Cisco TelePresence System MXP Series |
F9.0 |
No issues found. |
|