Cisco TelePresence

Interoperability Database

Warning - In preview mode

We endeavor to make our Cisco TelePresence products interoperable with all relevant standards-based equipment. Although it is not possible to test all scenarios, the testing on which this data is based covers most common functions of the listed endpoints and infrastructure.

The following pages describe the software releases that were tested for interoperability with Cisco TelePresence products. The results are grouped by product range. It is not possible to guarantee that all the models listed in the Product(s) column have been tested with the specified software release, although to the best of our knowledge we believe that all such models are interoperable with the associated software release. The absence of a device or release does not imply a lack of interoperability.

Cisco TelePresence Server software version 2.3

Show data for version: 4.44.34.2(4.23)4.2(3.x)4.24.1 4.14.14.03.13.0(2.48)3.0(2.24)3.02.3(1.55)2.32.2(1.54)2.2(1.48)2.1(1.18)

Cisco TelePresence

Product(s) Software releaseComments
Cisco TelePresence System 500-37, 1000, 1100, 1300-65, 3000, 3010, 3200, and 3210 1.10

Tested to work with TelePresence Server (TS) running 2.3 registered to VCS version X7.2, X7.1, or X7.0, if the system running CTS 1.10 is registered to a Cisco Unified Communications Server running software release 9.1(1) or 8.6(2a)SU3.

We recommend that you install and assign the Cisco Unified CM "vcs-interop" SIP Normalization script to make secure calls between CTS endpoints and endpoints and devices registered to VCS. 

For more information about the conditions required for secure calls, see this document: http://www.cisco.com/en/US/docs/telepresence/cts_admin/1_8/release/notes/cts_1_8_release_notes.html#wp138743 

For more information about the Cisco Unified CM script, see this document: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/8_6_2/cucm-rel_notes-862.html#wp1961382 

For more information about configuring Cisco Unified CM and Cisco VCS to interoperate via a SIP trunk, see this document: http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_6-1_7_8_and_X7-0.pdf 

For more information about products that are compatible with systems running CTS 1.10 software, refer to the Cisco TelePresence System Software Version Compatibility - 1.10 Releases document at the following URL: http://www.cisco.com/en/US/docs/telepresence/cts_admin/1_10/compatibility/cts_compatibility_1_10.html

Cisco TelePresence System TX 1300 47, Cisco TelePresence System 500-32, Cisco TelePresence System TX1300 47, Cisco TelePresence System TX1310 65, Cisco TelePresence System TX9000, Cisco TelePresence System TX9200 TX6.0.0

For more information about products that are compatible with systems running TX6.0, refer to the Cisco TelePresence TX System Software Version Compatibility and Interoperability with Other Devices—6.0.x Releases document at the following URL: http://www.cisco.com/en/US/docs/telepresence/tx_sw/6_0/compatibility/tx_sw_compatibility_6_0.html