|
|
We endeavor to make our Cisco TelePresence products interoperable with all
relevant standards-based equipment. Although it is not possible to test all
scenarios, the testing on which this data is based covers most common functions
of the listed endpoints and infrastructure.
The following pages describe the software releases that were tested for
interoperability with Cisco TelePresence products. The results are grouped by
product range. It is not possible to guarantee that all the models listed in the
Product(s) column have been tested with the specified software release, although
to the best of our knowledge we believe that all such models are interoperable
with the associated software release. The absence of a device or release does
not imply a lack of interoperability.
Cisco TelePresence
| Product(s) |
Software release | Comments |
|---|
| Advanced Media Gateway, Cisco TelePresence Exchange System |
1.1 |
Supported Cisco TelePresence Server (MSE 8710 blade in MSE 8000 chassis) component for Cisco TelePresence Exchange System Release 1.1 |
| Cisco TelePresence C Series, Cisco TelePresence MX Series, Cisco TelePresence SX20 Quick Set, Cisco TelePresence System EX Series, Cisco TelePresence System Integrator C Series |
TC6.0.0 |
CSCud79767: Content from CUCM-registered C-series endpoints can take 10 seconds to arrive at TS. Fixed in TS 2.42 |
| Cisco TelePresence System 500-37, 1000, 1100, 1300-65, 3000, 3010, 3200, and 3210 |
1.10 |
Tested to work with TelePresence Server (TS) running 2.2 registered to VCS version X7.2, X7.1, or X7.0, if the system running CTS 1.10 is registered to a Cisco Unified Communications Server running software release 9.1(1) or 8.6(2a)SU3.
We recommend that you install and assign the Cisco Unified CM "vcs-interop" SIP Normalization script to make secure calls between CTS endpoints and endpoints and devices registered to VCS.
For more information about the conditions required for secure calls, see this document: http://www.cisco.com/en/US/docs/telepresence/cts_admin/1_8/release/notes/cts_1_8_release_notes.html#wp138743
For more information about the Cisco Unified CM script, see this document: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/8_6_2/cucm-rel_notes-862.html#wp1961382
For more information about configuring Cisco Unified CM and Cisco VCS to interoperate via a SIP trunk, see this document: http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_6-1_7_8_and_X7-0.pdf
For more information about products that are compatible with systems running CTS 1.10 software, refer to the Cisco TelePresence System Software Version Compatibility - 1.10 Releases document at the following URL: http://www.cisco.com/en/US/docs/telepresence/cts_admin/1_10/compatibility/cts_compatibility_1_10.html |
| Cisco TelePresence System TX 1300 47, Cisco TelePresence System 500-32, Cisco TelePresence System TX1300 47, Cisco TelePresence System TX1310 65, Cisco TelePresence System TX9000, Cisco TelePresence System TX9200 |
TX6.0.0 |
Tested to work with TelePresence Server (TS) ) running 2.2 registered to VCS version X7.2, X7.1, or X7.0, if the system running TX6.0 is registered to a Cisco Unified Communications Server running software release 9.1(1) or 8.6(2a)SU2.
We recommend that you install and assign the Cisco Unified CM "vcs-interop" SIP Normalization script to make secure calls between CTS endpoints and endpoints and devices registered to VCS.
For more information about the conditions required for secure calls, see this document:
http://www.cisco.com/en/US/docs/telepresence/cts_admin/1_8/release/notes/cts_1_8_release_notes.html#wp138743
For more information about the Cisco Unified CM script, see this document:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/8_6_2/cucm-rel_notes-862.html#wp1961382
For more information about configuring Cisco Unified CM and Cisco VCS to interoperate via a SIP trunk, see this document:
http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_6-1_7_8_and_X7-0.pdf
For more interoperability information for systems running TX6.0 software, refer to the Cisco TelePresence System Software Version Compatibility - 1.10 Releases document at the following URL: http://www.cisco.com/en/US/docs/telepresence/cts_admin/1_10/compatibility/cts_compatibility_1_10.html#wp125923 |
|
Feedback